High Quality Automatic 3 Ton Diesel Forklift with Attachment Paper Clamps Can Be Customized

Product Introduce

Diesel forklift trucks need to maintain the content of the project is much more than the electric forklift trucks, according to the nature of its operation, the main work is cleaning,

Check, tighten, adjust and lubricate. The contents are as follows:

1, cleaning, cleaning work is to improve maintenance quality, reduce wear and reduce the basis of oil, material consumption, and for inspection, tightening, adjustment

Prepare for conditioning and lubrication. The general requirements of cleaning work are: clean appearance, the engine and the assembly parts and the vehicle tools are free of oil, the filter works normally, the hydraulic oil and oil are pollution-free, and the pipelines are unimpeded.

2. Check. Inspection is through inspection, measurement, testing and other main methods to determine whether the technical performance of each assembly and component is normal, whether the work is reliable, whether the parts have variation and damage, and provide a reliable basis for the correct use, storage and maintenance. The general requirements of the inspection work are: the engine and the assembly and components are in normal condition, the machine parts are complete and reliable, and the connections and fasteners are intact.

3. Be firm. Due to various reasons such as turbulence, vibration, thermal expansion and contraction of the machine parts in the work of the forklift, the fastener fastening degree of each part will change, and even loose, fall off, damage and loss. The general requirements of fastening work are: the engine and the assembly and components are in normal condition, the machinery is complete and reliable, and the parts are connected and fasteners are intact to ensure the safety and reliability of the operation.

4. Make adjustments. The adjustment operation is an important work to restore the good technology of forklift truck and ensure the normal cooperation between spare parts. The adjustment work directly affects the power, economy and reliability of forklift truck. Therefore, the adjustment work must be carried out in a timely manner according to the actual situation. The overall requirements of the adjustment work are to be familiar with the adjustment technical requirements of various parts and accessories, and carefully and carefully adjust according to the normal adjustment methods and steps.

5. Lubrication. Lubrication is an important work to ensure the normal and reliable operation of forklift trucks and extend the service life, mainly for the engine, gear box, hydraulic wheel internal and transmission components, as well as bearing lubrication. However, when replacing or filling new oil, do not use different types of lubricating oil. Lubricating accessories are the following: radiator, steering kingpin, wheel bearing, tilting cylinder pin, free lift guide bar, lifting chain, rear axle support, water pump transmission gear, engine oil pan, steering hydraulic cylinder, tilting cylinder pin, liquid storage tank, terminal reducer housing, gantry support, drive shaft, differential housing. The general requirements for lubrication work are: according to the seasons in different regions, the correct choice of lubricant varieties, the oil and tools of refueling should be clean, the refueling port and the oil nozzle should be wiped clean, and the filling amount should meet the requirements. In addition to the main assembly failure must be disassembled, it is generally not disassembled.